Steel Structure Melting Factory in Canada
Steel Structure Melting Factory in Canada
Area: 9,840 sqm
Steel Structure Melting Factory is from Liaoning Tianying Steel Structure Engineering Co.,Ltd..We manufacture the Steel structure building in Canada.The project design from Canada engineers. Tianying engineers deepened the composition according to the original design.We fabricate the steel Structure workshop components according to the original design drawing. The prefab steel Structure industries workshop size is 9840 Square meters.
Basic Building Parameters we take into consideration
|
Building width |
No matter what primary framing system is used,the building width is defined as the distance from outside fo eave strut of one sidewall to outside of eave strut of the opposite sidewall.Building width does not include the width of Lean- to buildingS or roof extentions |
End Bay Length |
The distance from outside of the outer flange od end wall columns to center line of the first interior frame column |
|
Buidling Length |
The longitudinal length of the building measured from out to out of end wall steel lines |
Interior bay Length |
The distance between the center lines of two adjacent interior main frame columns.the most common bay lengths are 6m,7.5m and 9m |
|
Buidling Height |
Building height is the eave height which usually is the distance from the bottom of the main frame column base plate to the top outer point of the eave strut.When colomns are recessed or elevated from finished floor,eave height is the distance from finished floor level to top of eave strut |
Design Loads |
Design for snow loads,earth quake loads,collateral loads,crane loads or any other loading condition,if required must be specified at the time of request for quotation |
|
Roof slope(x/10) |
This is the angle of the roof with respect to the horizonal.The most common roof slopes are 0.5/10 and 1/10.Any practical roof slope is possible. |
|
|
